PORTSTONE PATTERNS PortStone can be made in 10 different patterns plus 4 border patterns.  Any PortStone color and be made in any PortStone pattern.  This gives more than 100 possible color/pattern combinations to choose from.  You choose your pattern, you choose your color and we make your PortStone order especially for you.  FAST AND EASY INSTALLATION With PortStone, the pattern is already established! All PortStone products are made with the pattern already laid out in sheets of brick or stone.  Depending on the brick pattern or stone pattern chosen, each sheet will contain from 3 to more than 16 bricks or stones, already laid out, positioned, spaced and sized, in the pattern you choose.  Most PortStone brick patterns are "keyed" for easy alignment and installation.  For example, when installing regular brick pavers, the Herringbone pattern can be very difficult to keep straight.  Because regular brick flooring is laid one-brick-at-the-time, great care must be taken to properly space and position each brick.  But with PortStone, our Herringbone pattern comes in sheets of 16 bricks per sheet with each sheet covering approximately 3.75 square feet.  We suggest that you pop some chalk lines on the floor just to help keep the overall floor straight, but that should be done regardless of what kind of brick or tile is being laid.  Use PortStone's border stone or brick patterns to accent your floor, patio or pool deck.  Our Soldier Course brick border pattern comes in 36 inch strips for fast and easy installation.  We even make mitered corner pieces to dress up each corner with just the right finishing touch to accent any border application.  A nice look can be achieved by insetting the border 8" to 16" from the edge of the room or patio.  Then use the same brick or stone that is used in the rest of the area to fill in around the edges between the wall and the border.
Made With Pride in The USA
Diagram of the runningbond brick pattern. Diagram of the Basketweave brick pattern
RUNNINGBOND PATTERN Available in 2 sizes - Large Runningbond Brick measures approx. 4 ½” X 9”  Standard Runningbond measures approx 3 ½” X 7 1/2” PortStone Runningbond panels contain 8 bricks each.
BASKETWEAVE BRICK PATTERN Brick Size - 3 ½” X 7” ½” PortStone Basketweave panels contain 8 bricks each.
Diagram of the herringbone brick pattern Diagram of the pinwheel brick pattern.
HERRINGBONE BRICK PATTERN Brick size is 3 ½” X 7 ½” PortStone Herringbone brick panels contain 16 bricks each.
PINWHEEL BRICK PATTERN Brick sizes are approx. 3 ½” X 8” with the center square brick being approx. 3 ½” X 3 ½” PortStone Pinwheel Brick panels contain 5 bricks each.
Diagram of Old World Stone pattern. Diagram of the face brick pattern, commonly seen in brick wall, also referred to as runningbond.
FACE BRICK PATTERN Brick size is approx 2 ½” X 7 ½” PortStone Face Brick panels contain 8 bricks each.
OLD WORLD STONE PATTERN Stones range in size from approx 4” X 4” up to 12” X 12” with several sizes in between. PortStone Old World Stone panels contain either 3 or 4 stones each in various sizes and arrangements.
Diagram of the Promenade brick pattern.
PROMENADE PATTERN Each PortStone Promenade panel contains 52 bricks in vaious sizes bordered with 4” X 4” bricks. Panel size is approximately 32” X 32”. It takes 4 panels to make one “circle”.  There are 6 panels shown in the diagram to the left.  We have 4” X 4” bricks available to complete the double border effect.
FLAGSTONE PATTERN PortStone’s Flagstone pattern contains 30 to 34 stones each.  The stones are made in various sizes and configurations.  There are 5 different  panel configurations.  Panel size is roughly 30” X 36”.  Each panel is “keyed” so that it will fit  together top and bottom and side to side.  The stones within each panel are colored completely at random.  When properly installed, it should be very difficult to see any pattern repeat.
Diagram of the Riverstone pattern.
Riverstone Riverstone has the same layout as Pinwheel Brick, but the stones in Riverstone are larger - Approx. 5” X 10”
Diagram of a flagstone pattern.
Soldier Course Border Bricks are approx. 4” X 8”  Comes in 3’ strips.
Herringbone Border Whole bricks are approx. 3 ½” X 7 ½” Comes in 3’ strips.
Flagstone Border Stones range in size from roughly 3” X 4” to 6” X 8”.   Comes in 3’ strips.
Also available but not shown - 4” x 4” Tile and 4” X 4” Border Tile
To Place an Order or get more info Call 601-922-0902